|Home||» Products||» Industrial Dryer||» Contact Dryers|
Provided Contact Dryers are stacked for the transitional drying of different fabrics. In this procedure, the fabric/drying material is cautiously passed via the steam heated cylinders by making the use of steam at assorted pressures compassing from 35 psi to 65 psi. The dryers have been designed by making the use of high-end raw materials as well as spares so as to insure maximal strength with life. These melt with the wetting property to metal surface and can be flaked. With closed structure, these insure to maintain the quality of the materials. Additionally to this, these also ensure to minimize vapor nuisance during the procedures. Contact Drying- Steam Cylinders/Cans are principally employed for transitional drying process rather than final drying. These are also applicable for pre drying prior to stentering. The Cylinders these feature can be utilized to dry down a variety of fabrics and assist in providing a finish kindred to the iron. In stenters, the material is width wise extended for width regression via the series of holding pins or clips mounted on the pair of interminable chains. It is normal for steam cylinders to receive the problems of leaks at air vents, rotating joints, steam traps and vacuum breakers as these are direct effects of the designing of the heating system that relies on passing condensate & steam into as well as out of every cylinder, by making the use of a rotating joint. Offered Contact Dryers assist in initiating a good fixture regime.
KERONE All Rights Reserved.